Python通过paramiko库实现远程执行linux命令的方法

（1）首先安装paramiko库

pip install paramiko

（2）封装了以下类，可以直接拿来使用

import paramiko

class SSHClient(object):
    def __init__(self,host,username,password,port=22):
        self.__host=host
        self.__username=username
        self.__password=password
        self.__port=port
        self.__ssh=None
        self.connect()

    def __del__(self):
        self.close()

    def connect(self):
        self.__ssh = paramiko.SSHClient()
        self.__ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
        self.__ssh.connect(hostname=self.__host,port=self.__port,username=self.__username,password=self.__password)

    def exec(self,cmd):
        print(f"begin to run remote cmd: {cmd}")
        stdin, stdout, stderr = self.__ssh.exec_command(cmd,timeout=1800)
        returncode = stdout.channel.recv_exit_status()
        output=stdout.read().decode('utf-8')
        return output

    def close(self):
        self.__ssh.close()

（3）比如准备一个ip地址为192.168.1.12的linux虚拟机，然后直接按照如下方法使用上面封装的类即可实现远程执行linux命令

ssh=SSHClient(host="192.168.1.12",username="root",password="xxxxxx")
output=ssh.exec("ifconfig")
print(output)

（4）执行结果如下

begin to run remote cmd: ifconfig

ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet开发者_云计算 192.168.1.12 &nbjssp;netmask 255.255.255.0  broadcast 192.168.1.255

        inet6 240e:3a1:da7:6590:b39f:e15:6b3d:7e7  prefixlen 64  scopeid 0x0<global>

        inet6 fe80::4a67:131d:9133:acdf  prefixlen 64  scopeid 0x20<link>

        ether 00:0c:29:58:d8:4c  txqueuelen 1000  (Ethernet)

        RX packets 195340  bytes 148862388 (141.9 MiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 163425  bytes 20837281 (19.8 MiB)

     javascript;   TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

        inet 127.0.0.1  netmask 255.0.0.0

        inet6 ::1  prefixlen 128  scopeid 0x10<host>

        loop  txqueuelen 1000  (Local Loopback)

        RX packets 32  bytes 2592 (2.5 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 32  bytes 2592 (2.5 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500

        inet 编程客栈192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255

        ether 52:54:00:e8:3f:5c  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frapythonme 0

    &nwww.devze.combsp;   TX packets 0  bytes 0 (0.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

到此这篇关于python通过paramiko库实现远程执行linux命令的文章就介绍到这了,更多相关Python远程执行linux命令内容请搜索我们以前的文章或继续浏览下面的相关文章希望大家以后多多支持我们！